User's Manual

Using Wireless MiroView™ RTV Chapter 5
5-7
5.2.2 Starting MiroView™ RTV
n Switch on the mobile PC.
n Click the icon on the desktop to launch MiroView™ RTV.
n Connect the small side of the USB cable to the MiroCam®
Receiver.
n Connect the large side of the USB cable to the Mobile PC.
n Click the button to start image display
n Click the button to stop image display
n Click the button to restart image display
n Click the button on the top-right to close the MiroView™ RTV.
NOTE
Start, Pause, and Resume use the same button. The
function (Start, Pause or Resume) changes based upon the
status of MiroView™ RTV software.
CAUTION
MiroView™ RTV is not software for to be used for
diagnostic purposes. Use the MiroView™ software for
viewing the patient images for diagnostic purposes.
CAUTION
Do not disconnect the MiroCam® Receiver while the RTV is
in use. If the MiroCam® Receiver is disconnected during
use, the software may need to be restarted.
NOTE
If an error message appears while using MiroView™ RTV,
reconnect the USB cable between MiroCam® Receiver and
Mobile PC