User's Manual

Chapter 1 Safety Information
Page 11
n DO NOT charge the receiver while the receiver’s data cable and
sensor pads are still connected.
n Connect USB cable to receiver only after mounting it on charger.
n DO NOT install any other programs onto the workstation utilized for
review and diagnosis of patient image data (i.e computers with the
MiroView™ software).
n The capsule is disposable and should not be reused.
n In the medical environment condition, only use the capsule, receiver,
data cable and sensor pads.
n All products connected with the MiroCam® Endoscope system must
be compliant with requirements of IEC60950-1 or UL certifications.