User's Manual

Chapter 1 Safety Information
Page 9
n DO NOT operate the equipment with wet hands.
n Avoid using the equipment in extreme temperatures or humid
environments.
n DO NOT keep the equipment or carry out the procedure in places such
as areas exposed to direct sunlight, vicinity of heaters, vicinity of
chemical materials or gases, areas moist/damp or dusty, or poorly
ventilated areas.
n DO NOT disassemble or open the equipment without permission. This
will invalidate the warranty.
n DO NOT carry out the procedure in areas with high vibrations or in
environments where high electro-magnetic waves are generated.
n DO NOT pull out the power cord by grabbing the cable. When
disconnecting the power cord, grasp the plug, and pull out. This
prevents short-circuits, disconnection, or cord damage.
n CAUTION: Verify that the power voltage supplied from the power
receptacle matches with the voltage the system requires. Check
Voltage and Frequency on the AC/DC adaptor.
n CAUTION: Verify that all connection terminals are securely connected
to the system.
n CAUTION: Turn off the power switch on the receiver before connecting
the sensor pads.
n DO NOT discard cables and connectors with general waste. Discard
separately as industrial or medical waste.
n CAUTION: Discard the battery according to the regulations of industrial
waste. DO NOT discard with general waste.
n The capsule and sensor pads are medical waste, and should be
disposed of according to local regulations or WEEE directive on waste
disposal.
n DO NOT carry out the procedure simultaneously with other procedures
using medical products or equipment.