User's Manual

Chapter 8 EMC Information
Page 127
8.3 Guidance and manufacturer’s declaration -
electromagnetic immunity
The EUT is intended for use in the electromagnetic environment specified
below.
The customer or the user of the EUT should assure that it is used in such
an environment.
Immunity test
IEC 60601 test
level
Compliance
Level
Electromagnetic environment - guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 Vrms
150 kHz to
80MHz
3 V/m
80 MHz to
2.5GHz
3 Vrms
150 kHz to
80MHz
3 V/m
80MHz to
2.5GHz
Portable and mobile RF communications
equipment should be used no closer to any
part of the EUT, including cables, than the
recommended separation distance
calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance
where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and d is the recommended separation
distance in meters (m).
Field strengths from fixed RF transmitters,
as deter-mined by an electromagnetic site
80MHz to 800MHz
800MHz to 2.5GHz