Operation Manual

8
With the appropriate SSID/Wi-Fi signal selected, you will then enter your password. This is the
same password used to connect to your Wi-Fi router!
Note: You can also press the eyeball icon to make the password visible – ensure it is spelled
correctly.
DO NOT PRESS ‘CONNECT’ YET!
Now would be the time to get access to the back of the MyDoor™.
At this point, the MyDoor™ should already be powered on.
You will want to press and hold the pairing button on the back of the door station for ~2-3
seconds. You should then see the blue light surrounding the bell button on the front flash
rapidly if done successfully.