Installation and User's Guide Network Adapter

Page 52 of 83
IntraServer adapters can be identified at the ok prompt using the following
procedure:
1. select the adapter entry:
cd /pci@1f,0/pci@1/pci@1/IntraServer,Ultra2-scsi@0,1
2. use .properties to show the adapter properties
.properties
assigned-addresses 81036810 00000000 00001000 00000000 00000100
82036814 00000000 00100000 00000000 00000400
8203681c 00000000 00102000 00000000 00002000
82036830 00000000 00140000 00000000 00040000
compatible ithps
version# 1.0.0
model IntraServer,ITI82xx
wide
device_type scsi-2
clock-frequency 02faf080
reg 00036800 00000000 00000000 00000000 00000000
01036810 00000000 00000000 00000000 00000100
02036814 00000000 00000000 00000000 00000400
0203681c 00000000 00000000 00000000 00002000
02036830 00000000 00000000 00000000 00040000
arc-identifier NCRC810
name IntraServer,Ultra2-scsi
fcode-rom-offset 0000d000
devsel-speed 00000001
class-code 00010000
interrupts 00000001
max-latency 00000040
min-grant 00000011
revision-id 00000005
device-id 0000000b
vendor-id 00001000