Quick Guide INTRANAV NODE Quick start guide for the INTRANAV RTLS NODE (IN6000) INTRANAV RTLS NODE with Wi-Fi (IN6200) ENGLISH V1.
INTRANAV RTLS NODE (IN6200) - Quick Guide IntraNav GmbH Frankfurter Str. 27 65760 Eschborn, Germany Email: info@intranav.comInternet: www. IntraNav.com Registered office of the company: Frankfurt am Main (HRB 92924), responsible for the content: Ersan Günes Management Andreas Radix Ersan Günes Gonzalo Ibarra © Copyright 2021, IntraNav GmbH This work is protected by copyright. Its use outside the narrow limits of copyright law is not permitted without the consent of the publisher and is punishable by law.
Content Content 1 Legal information ...........................................................................4 2 Overview ........................................................................................7 General ................................................................................................ 7 Scope of delivery and accessories ...................................................... 7 Power supply ...................................................................................
Legal notice V1.0 1 Legal notice Warnings These instructions contain information that you must observe for your personal safety and to avoid damage to property. The instructions for your personal safety are highlighted by a warning triangle. Information on damage to property alone is not indicated by a warning triangle. Depending on the hazard level, the warnings are shown in decreasing order as follows. DANGER: means that death or serious injury will occur if the appropriate precautions are not taken.
Legal notice .0 CAUTION: means that property damage may occur if the appropriate precautions are not taken. If several hazard levels occur, the warning for the highest level is always used. If the warning triangle is used in a warning against personal injury, then a warning against property damage can also be added to the same warning.
Legal notice V1.0 use by third parties for their own purposes may infringe the rights of the owner. Disclaimer We have checked the contents of this publication for conformity with the hardware and software described. Nevertheless, deviations cannot be ruled out, so that we cannot guarantee complete conformity. The information in this publication is checked regularly and any necessary corrections are included in subsequent editions. 6 IntraNav GmbHFrankfurter Str. 2765760 Eschborn info@intranav.comwww.
Overview .0 2 Overview General The INTRANAV NODE (IN6200) is a fixed antenna system for real-time indoor positioning. The NODE or anchor receives the ultra-wideband (UWB) signals from the TAGs and forwards them to the INTRANAV backend where they are processed into position signals.
V1.0 Overview Product dimension Dimensions approx. 150 x 150 x 40 (mm) & weight approx. 180 (gr. ) Status LED IntraNav NODE P/N: IN 6000 / 10111013 FCC ID: 2AWK8IN6000 Frankfurter Str.27 65760 Eschborn Germany M12 d-coded UWB (CH5). For industrial use only. IP67 waterproof. 3W (max). Power over Ethernet (PoE).802.3af Class 1. This device complies with part 15 of the FCC Rules.
Assembly, commissioning, maintenance and safety .0 3 Assembly, commissioning, maintenance and safety General information Before installing the equipment, carefully read all the points listed in "3. Installation, Commissioning, Maintenance and Safety" to ensure proper installation and operation. The devices can only be used in conjunction with the INTRANAV RTLS solution.
Assembly, commissioning, maintenance and safety V1.0 The ambient temperature of the device must not exceed 50 °C. Avoid mounting locations with direct sunlight. The devices must be installed in accordance with the currently prevailing BG regulations "Electrical installations and equipment" (BGV A3). The devices must be installed in such a way that they are accessible at all times (by opening the housing cover) so that maintenance work can be carried out at a later date.
Assembly, commissioning, maintenance and safety .0 Operation of the device Due to its design, the device is not intended for use in EX zones. The intended operation of the system according to EN 60950-1 is only guaranteed when the housing cover is mounted (cooling, fire protection, radio interference suppression). In case of emergency (e.g. damaged housing, ingress of liquid or foreign objects), disconnect the power supply to the device immediately.
V1.0 Flashing blue Assembly, commissioning, maintenance and safety NODE (Here-I-Am) Mode The signal behavior of the status LED may vary slightly depending on firmware release and configuration. Please always refer to the INTRANAV.IO platform or current manual for the exact LED code. Cleaning and maintenance The device may only be installed and opened by appropriately trained personnel. Repairs to the device may only be carried out by an authorised service centreor trained key user.
Technical data .0 4 Technical data Property Description Radio procedure IEEE 802.15.4-2011 UWB (Ultra-Wideband) Frequency range UWB Channel 5 (6489.6MHz) EIRP -6.71 dBm(CE) Antenna Omnidirectional integrated antenna (max. 70m range) Sensors 3-axis accelerometer Integrated temperature sensor Supply voltage Supply voltage by means of - Power-Over-Ethernet Ethernet M12 d-coded Ethernet 100Mbit/s (full duplex) DHCP Yes IEEE 802.3af, Class 0 (<3W) W-Lan 802.11b/g 2.
V1.0 Admissions 5 Admissions EU Declaration of Conformity The current EU declaration of conformity for this product is available on request or by e-mail to info@intranav.com.
Admissions .0 Technical documentation for the assessment of electrical and electronic equipment with regard to the restriction of hazardous substances RED (Radio Equipment Directive) Protection of health and safety The products described in this document meet the requirements according to the attracted standards: Art.
V1.
Admissions .0 Note The specified approvals are only valid if the corresponding symbol is printed on the device. 6 Recycling and disposal The products are low in pollutants, recyclable and meet the requirements of the WEEE Directive 2012/19/EU for the disposal of waste electrical and electronic equipment. Do not dispose of the products at public disposal points.
Troubleshooting .0 7 Troubleshooting When a fault occurs, check the device for the following faults and take appropriate action. If there are other undefined errors, contact IntraNav support. (www.IntraNav.com) Q: NODE status LED is not lit. A: Check the power supply F: NODE status LED lights up red or yellow A: Take the error code from the manual Q: NODE is not listed among the network devices in the platform. A: Check the network connection and settings.
V1.0 Troubleshooting energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.