User's Manual

Installation, commissioning, maintenance and safety .0
6
IntraNav GmbHFrankfurter
Str. 2765760
Eschborn
Phone [phone]Fax
[phone]
[e-mail]_COPY17
Commerzbank
FrankfurtIBAN
DE91 5004 0000 0571
9141 00BIC
COBADEFFXXX
Commercial
registerRegistral court
Frankfurt a. M.
HRB 92924
3 Installation, commissioning,
maintenance and safety
General notes
 Before installing the units, read carefully all the points listed in "3.
Installation, commissioning, maintenance and safety" to ensure
proper installation and operation.
 The devices can only be used in connection with the INTRANAV
RTLS solution.
 The correct structure, installation and use of the localization system
tools and clients are described in the corresponding manuals.
Installation and operation
 To achieve an optimal indoor location, the device should be
mounted in such a way that there is a direct line of sight to the
mobile location sensors (INTRANAV TAGs).
 Before using the device, make sure that the device is not damaged
and cannot be damaged during use.
 Never cover the antenna with metallic or shielding objects.
 The specified ambient temperatures of the devices must be
maintained.
 Do not power on the device until completely installed.
 Ensure that all screws are securely and firmly screwed into the wall
or bracket and can support the weight of the unit and wiring.
 The housing of the device must never be crushed, pierced or
exposed to other mechanical force.
 The ambient temperature of the device must not exceed 50 °C.
Avoid mounting locations with direct sunlight.