User's Manual

V1.0 Installation, commissioning, maintenance and safety
9
IntraNav GmbH
Frankfurter Str. 27
65760 Eschborn
Phone [phone]
Fax [phone]
[e-mail]
Commerzbank Frankfurt
IBAN DE91 5004 0000 0571
9141 00
BIC COBADEFFXXX
Commercial register
Registral court
Frankfurt a. M. HRB 92924
 You must configure the INTRANAV NODE accordingly before
configuring it on the INTRANAV.IO platform.
 An INTRANAV NODE is ready for operation when the status LED is
permanently lit.
 The LED behavior is described as follows:
Display Status LED Description
Lights green Supply voltage OK
Flashing green Connection to network and INTRANAV.IO backend
successfully established and available
Flashing red Error: Accelerometer alarm
Glows red Error: See error code INTRANAV.IO platform for more
information
Flashing yellow Warning: No network connection
Lights yellow Warning: See error code INTRANAV.IO platform for more
information
Glows blue NODE faultless in operation
Flashing blue NODE (Here-I-Am) mode
The signal behavior of the status LED may vary slightly depending on the
firmware release and configuration. Please always refer to the
INTRANAV.IO platform or current manual for the exact LED code.
Cleaning and maintenance
 The device may only be installed and opened by appropriately trained
personnel.
 Repairs to the device must only be carried out by an authorised service
centre or trained key users.
 Unauthorized opening and improper repairs can cause considerable
danger for the user.