Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
29
Materials, Continued
Cables
One of the following cables, depending on site-specific cabling
requirements:
 Ethernet cable, shielded, Cat5E (SF/UTP) (
ETH-CAB-SFTP).
 AC power supply cable - 3 x 0.75 mm
2
(
AC-PWR-CAB).
 DC power supply cable - 2 x 1 mm
2
(
DC-PWR-CAB-1).
 DC power supply cable - 2 x 2.5 mm
2
(
DC-PWR-CAB-2).
 DC power supply cable - 2 x 2.5 mm
2
(
DC-PWR-CAB-3).
 Grounding cable, indoor use - 6 mm
2,
(GND-CAB6-ID).
 Fiber optic cable, prefabricated, outdoor use - Multi-Mode (MM) & Single
Mode (SM) in different lengths meters, as below:
 002 (
FBROPTMM-002).
 005 (
FBROPTMM-005).
 025 (
FBROPTMM-025).
 050 (
FBROPTMM-050).
 100 (
FBROPTMM-100).
 150 (
FBROPTMM-150).
 200 (
FBROPTMM-200).
 002 (
FBROPTSM-002).
 005 (
FBROPTSM-005).
 025 (
FBROPTSM-025).
 050 (
FBROPTSM-050).
 100 (
FBROPTSM-100).
 150 (
FBROPTSM-150).
 200 (
FBROPTSM-200).
ETH & SFP
glands
One of the following cables gland, depending on site-specific cabling
requirements:
 M20 gland used to protect S-FTP cable entry to WiBAS
TM
OSDR-HUB
RJ-45 receptacle (
M20-GLAND).
 M25 gland used to protect cable entry to WiBAS
TM
OSDR-HUB SFP cage
input (M25-GLAND).
 SFP gland & extension set for WiBAS
TM
G5 micro-BS / evo-BS
(
SFP-HOOD-OBX).
 M20 gland used to protect S-FTP cable entry to WiBAS
TM
G5 dual-BS
RJ-45 receptacle (ETH-HOOD-GX).
Continued on next page