Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
147
WiBAS OSDR-HUB and Omnidirectional 360 Antenna with
OSDR-360-ANT-MNT-KIT Mounting Kit, Continued
Procedure,
continued
Step
Action
7
Perform the following actions:
 Install the adaptation plate onto the antenna (A), as
described to INSTALLATION INSTRUCTION leaflet
(included in adaptation kit package).
 Install antenna to radio unit (B), as shown below:
 Lock and secure the radio latches, as shown below:
8
Use the tool with M8 hexagon female bit to fully tighten the set-
A and set-B screws of the pole mounting kit.
Do not over tighten. Adjust the tool for applying maximum
tightening torque 19.3 Nm.
End of procedure.