Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
145
WiBAS OSDR-HUB and Omnidirectional 360 Antenna with
OSDR-360-ANT-MNT-KIT Mounting Kit, Continued
Procedure,
continued
Step
Action
3
Install the set of pole mounting kit packing list materials, as
shown below:
 Use the tool with M8 hexagon female bit to fully tighten the
screws.
Do not over tighten. Adjust the tool for applying maximum
tightening torque 19.3 Nm.
4
Use the allen key (2.5 mm) to remove the radio unit screws, as
shown below:
Continued on next page