Installation Instructions

4. Installation Procedures
128
WiBAS G5 micro-BS / evo-BS and Sectoral 90 or 180
Antenna with MTK-DMA-BX Mounting Kit, Continued
Procedure,
continued
Step
Action
8
Open antenna latches and then mount the antenna onto the
radio as shown below (the following picture shows vertical
polarization):
Lock and secure all antenna latches.
9
Verify that the installation appears, as follows:
10
Use the U-wrench tool to fully tighten the M8 screws of the
mounting kit.
Do not over tighten. Adjust the tool for applying maximum
tightening torque 17.8 Nm.
End of procedure.