Installation Instructions

4. Installation Procedures
126
WiBAS G5 micro-BS / evo-BS and Sectoral 90 or 180
Antenna with MTK-DMA-BX Mounting Kit, Continued
Procedure,
continued
Step
Action
5
Use the u-wrench to install the antenna latches, as shown
below:
 From order code WMBS-OB-U-DSDS-SB or WG5-
EVO-BS-LB-UB use the following materials:
 Set of latches (x4)
 M6 x 12 mm screws (x8)
 M6 lock washers (x8)
Do not over tighten. Adjust the tool for applying
maximum tightening torque 2.0 Nm.
6
Perform the following antenna actions:
 Remove the plastic sticker (A)
 Lubricate the O-ring with silicone grease (B).
Continued on next page