Installation Instructions

WiBAS / WiBAS G5 Base Stations

Installation & Cabling Manual - Edition 3.2

125

WiBAS G5 micro-BS / evo-BS and Sectoral 90 or 180

Antenna with MTK-DMA-BX Mounting Kit, Continued

Procedure,

continued

Step

Action

Perform the following actions:

 Install the radio unit onto the elevation bracket. as shown

below:

 From order code WMBS-OB-U-DSDS-SB or WG5-

EVO-BS-LB-UB use the following materials:

 M5 x 50 mm screws (x4)

 M5 washers (x4)

 M5 nuts (x4)

 Spacers 12 mm (x4) - aluminum

 Use the tool with M5 hexagon female bit to fully tighten the

screws.

Do not over tighten. Adjust the tool for applying

maximum tightening torque 4.2 Nm.

Continued on next page