Installation Instructions
4. Installation Procedures
112
WiBAS G5 micro-BS / evo-BS and Sectoral 90 Integrated
Antenna with MTK-DMA-BX Mounting Kit, Continued
Procedure
(option-1),
continued
Step
Action
4
Perform the following actions:
Install the radio unit onto the elevation bracket. as shown
below:
From order code WMBS-OB-U-DSDS-SB or WG5-
EVO-BS-LB-UB use the following materials:
M5 x 50 mm screws (x4)
M5 washers (x4)
M5 nuts (x4)
Spacers 12 mm (x4) - aluminum
Use the tool with M5 hexagon female bit to fully tighten the
screws.
Do not over tighten. Adjust the tool for applying
maximum tightening torque 4.2 Nm.
Continued on next page