Installation Instructions

4. Installation Procedures
100
WiBAS G5 micro-BS / evo-BS and Sectoral 90 Integrated
Antenna, Continued
Installation
tools
Adjustable torque U-wrench, wrench (13 mm) and screw driver.
Prerequisite
Assembly the antenna as per the installation manual inside the box.
DO NOT INSTALL THE HOOKS.
Procedure
Prerequisite
Take into account the steps 2, 5, 6, 7 and 8 as
described in procedure of WiBAS OSDR-HUB and
Sectoral 90 Integrated Antenna on page 83.
How to install the WiBAS
TM
G5 micro-BS / evo-BS to HANT2890V-MB
antenna, proceed as follows:
Step
Action
1
Assembly the antenna as per the installation manual inside the
box. The following picture is an assembly preview
DO NOT INSTALL THE HOOKS WHICH INCLUDED IN
THE ANTENNA PACKAGE.
Continued on next page