Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
93
WiBAS OSDR-HUB and Sectoral 90 Integrated Antenna,
Continued
Procedure,
continued
Step
Action
8
Use the u-wrench tool to perform azimuth adjustment, as
described to the antenna included instructions.
Use the u-wrench tool to perform elevation adjustment, as
described to the antenna included instructions.
Use the allen key (included in package) to remove the tool.
Do not over tighten. Use the adjustable u-wrench to apply
the final tightening torque (follow the included antenna
instructions).
End of procedure.
Continued on next page