Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
263
Power Supply, Continued
Procedure for
DC power
supply cable
for WiBAS G5
dual-BS
How to terminate 2 x 2.5 mm
2
DC power supply cable (DC-PWR-CAB-3) to
WiBAS
TM
G5 dual-BS power connector (PWR-CONN-GX), proceed as
follows:
Step
Action
1
Perform the following actions:
 Strip approx. 10 mm from the cable’s outer sheath (A).
 Strip approx. 4 mm from each wire insulation (B).
 Pass the cable through the parts of gland (C).
Continued on next page