Installation Instructions

Appendix B – Terminating Cables
262
Power Supply, Continued
DC-PWR-CAB-3
cable
termination
overview for
WiBAS G5
dual-BS
DC-PWR-CAB-3 cable wires labeling
Due to polarity concern of the radio unit power receptacle the following
connection diagram should be taken into account for proper unit powering
up.
 The wire labeled 1 of the DC power supply cable connects the negative
pole of the DC power supply with the negative pole of the radio unit
receptacle (flat side).
 The wire labeled 2 of the DC power supply cable connects the positive
pole of the DC power supply with the positive pole of the radio unit
receptacle (curve side).
If the above polarity concern is not taken into account then the radio
unit will not power on.
Continued on next page