Installation Instructions
WiBAS / WiBAS G5 Base Stations 
Installation & Cabling Manual - Edition 3.2 
  251 
Ethernet (SF/UTP), Continued 
Procedure, 
continued 
Step 
Action 
2 
Untwist wire pairs and arrange according to the T-568 standard 
straight-through cable, as shown below: 
3 
Carefully insert the eight wires into the cavity of the wire guide 
so that its numbering is visible from the top. 
4 
Measure 16 mm from the jacket’s end and cut all wires 
protruding from the guide. 
Continued on next page 










