Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
249
Ethernet (SF/UTP)
Introduction
Apply this procedure for terminating the ETH-CAB-SFTP cable to ST-RJ45
connector.
Termination
overview
The equipment to which you connect the cable requires a different way of
cable termination.
Mainly there are two types of cable termination, as shown below:
Termination
Type
Details / Photo
Equipment to Connect
A
No shield wires exposed
All, except PONE-OD-DC
B
Shield wires (twisted) exposed
PONE-OD-DC
ST-RJ45
connector
overview
The connector ST-RJ45 is composed of two parts, as described below:
 the main body and
 the wire guide (with numbering)
Continued on next page