Installation Instructions
Appendix A - Installing Power Injectors
216
POE-AC112-ID / POE-AC75-ID / POE-ID-AC72 / POE-AC60-ID /
POE-AC56-IDH
Introduction
Apply this procedure for installing the following indoor AC power injectors:
POE-AC112-ID
POE-AC75-ID
POE-ID-AC72
POE-AC60-ID
POE-AC56-IDH
Power
injectors
details
POE-AC112-ID: AC POE++ injector, indoor, wall-mount or desktop,
112 W, -40C ~ +50C, 100 to 240 V AC, 47-63 Hz.
POE-AC75-ID: AC POE injector, indoor, 75 W, -20 C to +40 C, 90 V AC
to 264 V AC, 47 Hz to 63 Hz.
POE-ID-AC72: AC POE injector, indoor, 72 W, -5 C to +45 C, 100 V AC
to 240 V AC, 50 Hz to 60 Hz.
This model offers Network Signal and POE Power Output surge
protection (10 / 700 μs): 6 Kv.
Grounding cable 6 mm2 is included in the package
POE-AC56-IDH: AC POE injector, indoor, temperature hardened, 56 W.
POE-AC60-ID: AC POE injector, indoor, 60 W.
Materials for wall mount installation are not included on the
packing list.
Continued on next page