Installation Instructions

4. Installation Procedures
208
Cable Holder
Introduction
Apply this procedure for installing the cable holder to the following WiBAS
TM
Base stations:
 WiBAS
TM
OSDR-HUB (OSDR-HOLD-2 and OSDR-HOLD-5)
 WiBAS
TM
G5 dual-BS (CBL-HLDR-GX).
Tools and
materials
Tools
 Adjustable torque wrench tool with hexagon male bit (refer to
Equipment installation tools).
Materials
 OSDR-HOLD-2 or OSDR-HOLD-5
 CBL-HLDR-GX
 Radio units.
Continued on next page