Installation Instructions

WiBAS / WiBAS G5 Base Stations
Installation & Cabling Manual - Edition 3.2
207
Power Supply Cable, Continued
Procedure for
WiBAS OSDR-
HUB
How to install the power connector (already terminated to power supply
cable) to WiBAS
TM
G5 dual-BS, proceed as follows:
Step
Action
1
Unscrew the protective tap and remove it. Keep it for
maintenance reasons.
2
Insert the connector, as shown below:
3
Fully tighten the connector, as shown below:
Do not over tighten.
End of procedure.