Installation Instructions

4. Installation Procedures

194

Fiber Optic Cable, Continued

Procedure for

WiBAS OSDR-

HUB, continued

Step

Action

Pass the cable through the parts of gland, as shown below.

The seal shown below is split-type for easy installation and

removal.

Perform the following actions:

 Install the fiber optic cable into the SFP module (A).

 Plug the SFP module into the OSDR SFP cage (B).

 Install the body extension (C).

Do not over tighten. Adjust the tool for applying maximum

tightening torque 10 Nm.

Continued on next page