Installation Instructions

WiBAS / WiBAS G5 Base Stations

Installation & Cabling Manual - Edition 3.2

185

ETH Cable, Continued

Procedure for

WiBAS G5

micro-BS /

evo-BS

How to install the ETH cable to WiBAS

G5 micro-BS / evo-BS radio unit,

proceed as follows:

Step

Action

Perform the following actions:

 Unscrew the sealing nut (A).

 Use the screwdriver for pushing forward the plastic protection

in the middle of the seal (B).

 Use the screwdriver for pulling outwards the seal (C).

 Remove the plastic part (D).

Continued on next page