Installation Instructions

4. Installation Procedures
88
WiBAS-Connect Combo, Continued
Procedure for
WiBAS-
Connect (auto-
polarization)
Combo
How to install the WiBAS
TM
-Connect auto-polarization Combo to pole
mounting kit (WCONN-DP-PL-MNT) or to wall mounting kit (WCONN-PL-
W-MNT-DP), proceed as follows:
Step
Action
1
For pole mount installation, proceed as follows.
For wall mount installation go to step 7.
Mount the azimuth bracket onto the pole bracket and then
install the respective set of mounting kit packing materials, as
shown below:
Do not over tighten the screws. Adjust the tool for
applying max tightening torque 15 Nm.
Continued on next page