Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
207
Ethernet (S-FTP), Continued
Procedure,
continued
Step
Action
5
Perform the following:
 Fold back the crimping terminal of the connector.
 Fully insert wire guide and cable into the connector’s body
until the shield (overlapping the jacket’s end) reaches the
crimping position.
For termination type A:
For termination type B:
6
Terminate the wires onto the RJ-45 jack using the tool CRIMP-
TOOL-S.
Continued on next page