Installation Instructions

WiBAS / WiBAS G5 Terminal Stations

Installation & Cabling Manual - Edition 2.1

205

Ethernet (S-FTP), Continued

Tools and

materials

Tools

Blade, cable cutter, plier (long nose) and CRIMP-TOOL-S (refer

to Termination of cables).

Materials

ETH-CAB-SFTP and ST-RJ45.

Procedure

How to terminate the Ethernet (S-FTP) cable to ST-RJ45 connector,

proceed as follows:

Step

Action

Perform the following actions:

 Strip the outer jacket

 40 mm for termination type A

 80 mm for termination type B

 Fold shield back (over the jacket).

 Do the following:

 Twist shield wires together and allow 10 mm of shield to

surround jacket’s end (for termination type A)

 Twist shield wires together and allow 20 mm of shield to

surround jacket’s end (for termination type B)

 Completely remove the exposed foil.

Termination type A:

Termination type B:

Continued on next page