Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
181
PONE-OD67-AC
Introduction
Apply this procedure for installing the outdoor AC power injector PONE-
OD67-AC.
Power injector
details
Characteristics:
 AC PONE injector
 Outdoor
 67 watt
 Wall mount
 Temperature hardened
 Operating temperature -40 C to +55 C
 110 V AC to 240 V AC, tested for 99 V AC to 255 V AC
 50 Hz to 60 Hz
 IEC 60529 / IP67 class.
Packing List:
 Ethernet cable glands are pre-installed on the unit.
 Grounding screw is pre-installed on the unit.
 AC Power connector is included in the package.
 Screws, washers and wall plugs are included in the package (for wall
installation)
 For pole installation, a mounting bracket (INSTPONE-PL2) should be
ordered.
 For grounding, a grounding kit (GND-KIT16-OD) should be ordered.
 For powering, an AC power cable (AC-PWR-CAB) should be
ordered.
 Lightning surge protection is embedded in the unit.
Continued on next page