Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
153
WiBAS OSDR-TS and Panel, Continued
Procedure,
continued
Step
Action
15
Perform the following actions:
 Lubricate the O-ring with silicone grease (A).
 Remove antenna protection plastic sticker from the feeder
(B).
16
Unlock the four radio unit clamps, as shown below.
17
Mount the panel antenna onto the WiBAS
TM
OSDR-TS, as
shown below
Continued on next page