Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
149
WiBAS OSDR-TS and Panel, Continued
Procedure,
continued
Step
Action
8
Perform the following actions:
 Unscrew the four screws (A).
 Place the radio mounting adapter onto the radio unit, as
shown below (B).
 Use the wrench tool with hexagon male bit to tighten the
screws (C).
Do not over tighten the Μ5 screws. Adjust the tool for
applying max tightening torque 4.2 Nm.
9
Insert arm into the arm bracket, as shown below.
Continued on next page