Installation Instructions

4. Installation Procedures
146
WiBAS OSDR-TS and Panel, Continued
Pole
adaptation
packing
materials
INST-ADAPT
Details
 A: Hose clamps for pole diameter 80
mm up to 100 mm (x2).
 B: Hose clamps for pole diameter
104 mm up to 120 mm (x2).
 C: Adaptation Bracket.
 D: M8 washers (x4).
 E: M8 x 25 mm screws (x4).
Antenna
adaptation
packing
materials
OSDR-PL-ANT-KIT
Details
 Hooks (x4).
 M3 x 8 mm screws (x8).
Tools
 Adjustable torque U-wrench
 Adjustable torque wrench with hexagon male and female bits
 Cross screw driver
Procedure
How to install the WiBAS
TM
OSDR-TS to panel antenna, proceed as
follows:
Step
Action
1
For pole installation with poles diameters 61 mm to 100 mm
and 101 mm to 120 mm, proceed to the next step.
For wall installation go to step 20.
For pole installation with pole diameter 48 mm to 60 mm, go to
step 6.
Continued on next page