Installation Instructions

4. Installation Procedures
138
WiBAS-Connect and Panel, Continued
Procedure for
VERTICAL
antenna
orientation,
continued
Step
Action
5
Mount the elevation bracket onto the radio unit and then install
the respective set of mounting kit packing materials, as shown
below:
Do not over tighten the screws. Adjust the tool for
applying max tightening torque 4.2 Nm.
6
Mount the radio unit onto the antenna and then install the
respective set of antenna packing materials, as shown below:
Do not over tighten the screws. Adjust the tool for
applying max tightening torque 4.2 Nm.
Continued on next page