Installation Instructions

WiBAS / WiBAS G5 Terminal Stations
Installation & Cabling Manual - Edition 2.1
119
WiBAS-Connect and Parabolic 0.3 m with Adaptation Plate /
0.6 m with Clamps, Continued
Procedure
using 0.6 m
antenna,
continued
Step
Action
8b
WiBAS
TM
-Connect (CONN-OB-U-DSDS-DP) to 0.6 m antenna
(ANT-DP-2628-2F-C) with clamps, proceed as follows:
Lock and secure all four clamps according to the pattern
below.
Details of Clamps closing
9
For cables installation refer to Installing Radio Units Cables .
End of procedure.
Continued on next page