Users Manual

WiBAS OSDR-Hub & Terminal Station / WiBAS-Connect Terminal Station
Start Up & Commissioning Manual - Edition 5.1
9
1. Introduction
About this Document
Scope of
Document
The scope of this document is to provide detailed instructions on the startup
and commissioning of the following PtMP products:
• WiBAS
TM
- OSDR Hub & Terminal Station
• WiBAS
TM
- Connect Terminal Station
The commissioning is performed via Node Manager
(1)
.
Target
audience
The procedures described in current document can be carried out ONLY by
wireless certified technician with the following skills:
• Wireless installation inspection (pole installation, cabling, grounding,
powering e.t.c)
• Coarse and Fine antenna alignment (for Hub and Terminal Station)
• System commissioning using laptop and telecom software.
• System services provisioning.
Software
version
This document applies in a specific software release.
The Release version as well as the Release Notes of product are available
and provided by the product support (wireless_support@intracom-
telecom.com) of Intracom S.A. Telecom Solutions.
Reference
manuals
The reference manuals are listed below:
Item
Description
1
OSDR Installation Manual.
2
WiBAS-Connect Installation Manual.
3
WiBAS OSDR Node Manager Manual.
4
OSDR_WiBAS-Connect Product Catalog.
Continued on next page
(1)
Embedded application.