Users Manual

6. Equipment Commissioning

WiBAS-OSDR TS

, Continued

Procedure for

WiBAS-OSDR

TS with Panel

Antenna

To perform WiBAS-OSDR TS panel antenna alignment, please follow the

steps below:

Step Action

1 Perform coarse alignment, as follows:

Use the respective spanner key to rotate the assembly on the pole so that the

antenna is “visually” aligned with the target base station sector.

 Use compass and binoculars for alignment.

 Use the RF planning values for aligning the assembly to the target base

station sector.

Use the adjustable U-Wrench to apply the final tightening torque (M8 u-bolts

nuts max tightening torque 15 Nm).

2 Power on the terminal station.

Connect the RSSI cable as described to RSSI cable connection procedure on page

42.

Continued on next page