Users Manual

WiBAS OSDR-Hub & Terminal Station / WiBAS-Connect Terminal Station
Start Up & Commissioning Manual - Edition 5.1
21
Powering through AC Power Injector
Powering up
via AC power
injector
To power up a radio unit using an AC power injector, plug the AC power
supply cable coming from the AC power injector to the AC power source.
Depending on the type of AC power injector used, the LEDs status should be
as described to the following paragraphs.
In case of any error, see Appendix A – LED Indications
on page
85.
AC power
injectors for
WiBAS-
Connect
AC power injector 35 W:
Find below the LED status indication of the outdoor AC power injectors when
AC input is ok:
Continued on next page