Users Manual

Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
113
Indoor AC POE, Continued
Wall
installation
procedure
PoE is an indoor device only and can be installed as desktop or in a wall
surface, as shown below:
Materials for wall mount installation are not included on the packing list of
the product ((requires wood plugs (5 mm X 25 mm) and wood screws cross-
headed (4 mm x 30 mm)).
To install the cables (Ethernet, power and grounding), proceed as follows:
Step Action
1
Prepare and terminate the Ethernet cables (x 2) as instructed to
Appendix D: Cables Termination on page 114.
ONLY for 72 W POE: Prepare and terminate the grounding
cable (x 1) as instructed to Appendix D: Cables Termination.
2 Connect the IN/LAN receptacle of the device to customer
network.
Connect the OUT/POE receptacle of the device to the
correspondence receptacle of the radio unit.
3
Install the IEC plug to the respective input of the PoE and the
other plug to the available main socket.
End of procedure.