Users Manual

Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
111
Outdoor AC PoNE, Continued
Pole and wall installation procedure, continued
Step Action
7
Wall installation:
Perform the following actions:
• Position the device on the wall surface and using a pencil mark the drill points.
With the drill machine (fitted with 5 mm bit), drill four holes on the wall surface, at a
depth of 45 mm.
• Install the 2 supplied wall plugs and using the cross headed screwdriver and
tighten the 2 screws.
End of procedure.