User's Manual

StreetNode 6250 PTP with Embedded Node Manager
WebUI Commissioning Manual – Edition 1.1
6
Connecting the Laptop
Where to
connect
The laptop can be connected directly to the StreetNode
TM
6250
PTP node, in any of its available traffic interfaces located
underside:
•
Gigabit Ethernet 1 (electrical, RJ-45).
•
Gigabit Ethernet 2 (electrical, RJ-45).
•
Gigabit Ethernet 3 (SFP).
Laptop
StreetNode
GbE
Ethernet
cable
(Power supply cabling is not shown for simplicity).
Procedure
By using an appropriate equipment lifter vehicle (for elevating to
the installation position) and an Ethernet cable, connect the laptop
to one of the Ethernet / SFP ports at the bottom of the
StreetNode
TM
6250 PTP box.
If an Ethernet cable is already pre-installed, unplug it and connect
the laptop with another Ethernet cable. Restore everything as
found after finishing with the startup and commissioning.