Xtreme Imaging Table of Contents ： Preface…………………………………………………………..1 Main features…………………………………………………....1 Computer operating system requirements………………............1 Prestart Guide…………………………………………………...2 Basic installation…………………………………………..........3 Video mode……………………………………………………..5 Photo mode……………………………………………………10 Playback mode………………………………………………...15 Settings………………………………………………………...
Preface： Thank you for purchasing an Intova Sport HD. SP1 utilizes the 1080p High Definition Video format and is waterproof to 60 meters/200 feet. Visit www.intova.net to view the wide range of mount options available to help you fully utilize this great camera.
Windows Vista : ●800MHz processor and 512 MB of system memory . ●20GB hard driver with minimum 15GB of available space . ●Support for Super VGAgraphics. ●Available USB Interface. Windows 7 : ●1 GHz or faster 32-bit(x86) or 64-bit (x64) processor. ●1GB RAM (32-bit) or 2GB RAM (64-bit). ●16GB available system RAM(32-bit) 或 20GB(64-bit) . ●WDDM1.0 or higher version driver’s Direct X9 graphics device. Macintosh : ●Power Macintosh G3 500 MHz or higher . ●Mac OS X version 10.2.6 or later .
Description: Basic installation： Open the housing： Follow the directions in the figure below to open the housing,. Insert memory card： Follow the indicated direction in the figure below to insert Micro SD memory card. After the card is inserted, the icon will show on LCD screen. * Turn off power when inserting or removing memory card.
Notes： 1. Format the memory card before use 2. If the DV does not work with the memory card, please try a new card. 3. The DV can’t record a video or take a photo without a properly inserted memory card. USB charging and transferring： Connect your computer to DV with USB cable. After connection, press the power button, and then use Up/Down buttons to select MDSC/CHARGE/OPEN. MDSC： Enter to download video or image files. CHARGE：Charge or recharge battery. Full charging time is around 6 hours.
Basic operation： FUNCTIONS: Video Photo Playback POWER： Press ”POWER button” to turn on / turn off。 MODE SWITCH： Press ” MODE button” to switch between VIDEO/PHOTO/PLAYBACK. VIDEO/CAMERA： Press ”Shutter button“ to take a video or photo PLAYBACK： Press ”MODE button” to enter Playback mode to view video and image files. DISPLAY： When in video or camera mode, press Up button to turn off LCD and save battery power.
Settings： In Video mode, press “MENU Button”, and use UP / DOWN buttons to select desired adjustment setting. The following icons represent all of the functional settings in Video mode. AUDIO / SIZE / EV / WHITE B / METERING / CONTRAST / SHARPNESS / EFFECT / RECYCLE / VIDEO FLIP. * Audio：In the setting list, use the UP / DOWN buttons to select “AUDIO”, and press “OK button” to enter setting. Choose ON or OFF, and press “OK button” to confirm selection, then press MENU button to return.
* Size：In the setting list, use the UP / DOWN buttons to select “SIZE”, and press “OK button” to enter setting. There are 1080P / 720P / WVGA1 / WVGA / VGA. After selection, press “OK button” to confirm, then press MENU button to return. “OK” * EV：In the setting list, use the UP / DOWN buttons to select “EV”, and press “OK button” to enter setting. There are +2 / +1.7 / +1.3 / +1 / +0.7 / +0.3 / 0 / -0.3 / -0.7 / -1 / -1.3 / -1.7 / -2.
* Metering：In the setting list, use the UP / DOWN buttons to select “METERING.”, and press “OK button” to enter setting. There are AVERAGE / SPOT / CENTER. After selection, press “OK button” to confirm, then press MENU button to return. “OK” * Contrast：In the setting list, use the UP / DOWN buttons to select “CONTRAST”, and press “OK button” to enter setting. There are STANDARD / HARD / SOFT. After selection, press “OK button” to confirm, then press MENU button to return.
* Effect：In the setting list, use the UP / DOWN buttons to select “EFFECT”, and press “OK button” to enter setting. There are OFF/ ART / SEPIA / NEGATIVE / MONOCHROME / VIVID. After selection, press “OK button” to confirm, then press MENU button to return. “OK” * Recycle：In the setting list, use the UP / DOWN buttons to select “RECYCLE”, and press “OK button” to enter setting. There are NO/1 MIN / 2 MINS / 3 MINS / 4 MINS / 5 MINS / 10 MINS / 15 MINS.
Photo mode： Press the MODE button to enter Photo mode. Adjust the DVR to take photos of the objects (viewed from the LCD), press the Shutter button to take photos. Digital zoom： Use the “Down button” to zoom in on scene while selecting targets. The zoom factor will be displayed on the LCD, and can be increased to a maximum of 4X (resolution drops as an image is magnified). The display of photo mode： The following icons show the various icon settings displayed on the LCD in Photo mode.
* Size：In the setting list, use the UP / DOWN buttons to select “SIZE”, and press “OK button” to enter setting. There are 12M / 8M / 5M / 3M. After selection, press “OK button” to confirm, then press MENU button to return. “OK” * EV：In the setting list, use the UP / DOWN buttons to select “EV”, and press “OK button” to enter setting. There are +2 / +1.7 / +1.3 / +1 / +0.7 / +0.3 / 0 / -0.3 / -0.7 / -1 / -1.3 / -1.7 / -2. After selection, press “OK button” to confirm, then press MENU button to return.
* White Balance: In the setting list, use UP / DOWN buttons to select “WHITE B” , and press “OK button” to enter setting. There are AUTO / SUNNY/ CLOUDY / TUNGSTEN / FLUORESCENT / MANUAL. After selection, press “OK button” to confirm, then press MENU button to return. “OK” When selecting MANUAL white balance mode and exiting menu, monitor will show blinking manual white balance icon. Aim camera at white balance board and press shutter button to set.
* Sharpness：In the setting list, use the UP / DOWN buttons to select “SHARPNESS”, and press “OK button” to enter setting. There are STANDARD / HARD / SOFT. After selection, press “OK button” to confirm, then press MENU button to return. “OK” * Effect：In the setting list, use the UP / DOWN buttons to select “EFFECT”, and press “OK button” to enter setting. There are OFF/ ART / SEPIA / NEGATIVE / MONOCHROME / VIVID. After selection, press “OK button” to confirm, then press MENU button to return.
* Burst：In the setting list, use the UP / DOWN buttons to select “BURST”, and press “OK button” to enter setting. There are NO/ 3 PICS / 5 PICS / 10 PICS. After selection, press “OK button” to confirm, then press MENU button to return. Notice: This function will allow the camera to rapidly shoot the selected number of images in a “burst”. “OK” * Photo flip：In the setting list, use the UP / DOWN buttons to select “PHOTO FLIP”, and press “OK button” to enter setting.
“OK” Playback mode： Press Mode button to enter into Playback mode. The LCD will display as follows. Press UP/DOWN buttons to search for the videos or photos you would like to view, then press OK button to play/view. Video playback： Use UP/DOWN buttons to select the video to be viewed, and press OK button to play. Press OK button again to stop the video, or press UP button to fast forward. Photo playback： Use UP/DOWN buttons to select photo to be viewed.
* Delete：Use UP/DOWN buttons to select the video or photo to be deleted. Press MENU button, choose “DELETE” and press OK button to enter setting list. Use UP/DOWN buttons to select YES (Single image) or DELETE ALL. “OK” * Slide Show：In Playback mode, press Menu button to enter setting list then use UP/DOWN buttons to select “SLIDE SHOW”. There are NO / 1 SECOND / 3 SECONDS / 5 SECONDS. After selection, press OK button to confirm. Press Menu button to return and start slide show display.
* Language：Use UP/DOWN buttons to select ”LANGUAGE”, and press OK button to enter setting list. There are ENGLISH、PORTUGUESE、 русский 、KOREAN、SPANISH、ITALIANO、 DEUTSCH、FRANçAIS、日本、繁體中文、简体中文. After selection, press OK button to confirm, and press Menu button to return. * Volume：Use UP/DOWN buttons to select ”VOLUME”, and press OK button to enter setting list. There are seven volume levels. Full volume is number 7. After selection, press OK button to confirm, and press Menu button to return.
“OK” * Clock：Use UP/DOWN buttons to select “CLOCK”, and press OK button to enter setting list. Use UP/DOWN buttons again to adjust hour / minute, and press OK button to confirm the setting. After adjustment, press OK button again to confirm, then press Menu button to return. * Format：Use UP/DOWN buttons to select “FORMAT”, and press OK button to enter setting list. Choose YES or NO, and press OK button to confirm the selection. Press Menu button to return.
* Sys. reset：Use UP/DOWN buttons to select ”SYS.RESET”, press OK button to enter setting list. Choose YES or NO, and press OK button to confirm the selection. Press Menu button to return. * Auto off：Use UP/DOWN buttons to select ”AUTO OFF”, and press OK button to enter setting list. There are OFF / 1 MIN / 3 MINS / 5 MINS. After selection, press OK button to confirm, then press Menu button to return. * Light freq：Use UP/DOWN buttons to select ”LIGHT FREQ”, and press OK button to enter setting list.
* TV OUT：Use UP/DOWN buttons to select ”TV OUT”, and press OK buttons to enter setting list. Options are NTSC / PAL. Adjust according to country standard. After selection, press OK button to confirm, then press Menu button to return. * Stamp：Use UP/DOWN buttons to select ”STAMP”, and press OK button to enter setting list. There are OFF、DATE、DATE / CLOCK. If selected, the time detail will be shown on video and photos. After selection, press OK button to confirm, then press Menu button to return.
* Version：Use UP/DOWN buttons to select ”VERSION” to view the current software version.
