User Manual
3
Important notice:
Do not attempt to take apart the camera as there are high voltage parts and dangerous electric
shock can occur.
If the camera is dropped or smashed and internal parts are exposed, do not touch as there is a
danger of electric shock.
Do not leave the camera in direct sunlight or near heat sources as these can damage the
camera.
If camera becomes hot during use, turn off the power immediately.
For storage, remove the memory card and keep camera in a cool, dry place with housing door
slightly open.
Before each use, clean and maintain O-ring by removing any dirt, sand and other debris and
lightly lubricating with silicone grease to prevent drying and cracking.
Use float strap as extra precaution for water use.
System requirements for 1080P HD video (minimum)
PC
Mac
Windows XP (Service Pack 2 or later),
Vista, 7, 8
Mac OSR X 10.4.11 or later
3.2GHz Pentium 4 or faster
2.0GHz Intel Core Duo or faster
DirectX 9.0c or later
Minimum 1GB of system RAM
Minimum 1GB of system RAM
Video card with minimum 256MB of RAM
Video card with minimum 256MB of RAM
Recommended screen resolution
1600x900 (minimum 1024x768)
Recommended screen resolution
1600x900 (minimum 1024x768)
Included Accessories:
User’s manual mini CD, lithium ion battery, USB cable, RF remote controller with waterproof bag, float
strap, lens cap, anti-glare hood, silicone grease, Quick Start Guide, Optional Accessory brochure.