User's Manual

6. BRIGHTNESS: When pressed, the brightness will change depending on the environment, and you
can choose between bright and dark (2 modes).
7. PLAY/STOP: After connecting your device to the mood lamp, you can play or pause music.
8. LASER: Each press will select FADE(IN & OUT), STATIC, or OFF for the laser.
※ Bluetooth Pairing
1. When you turn on the mood lamp, it will be on standby for Bluetooth connection.
2. Search for Bluetooth devices on the device you wish to connect to (e.g. smartphone), and choose
“JK’s Mikrokosmos” to pair.
3. When the Bluetooth pairing succeeds, the mood lamp will give a voice notification.
4. When you select a song on your paired device (e.g. smartphone) and press PLAY, the mood lamp
will play the selected music.
※ Mikrokosmos usage environment
1. Recommended temperature of use: 5 ◦ C ~ 40 ◦ C(41 ◦ F ~ 104 ◦ F)
2. This product is meant for indoor use. You cannot change the light source of this product.
Caution: To reduce risk of electrocution, do not disassemble the product. If the product is
malfunctioning, please request a repair via our service center.
Warning: Do not use this product outdoors (beware of fires and/or electrocution). Keep the
product away from water and moisture.
※ Precautions for using Mikrokos
mos
1. This product is for persons aged 14 and above.
2. Please read this manual thoroughly before use.
3. Please adhere to the content of this manual and be aware of all the warnings.
4. Do not use this mood lamp near water.
5. Only clean the product with a dry cloth. For stubborn stains, use a soft cloth dampened with small
amount of water and dry the mood lamp right away.
Please use a clean cloth, and do not use a polishing cloth, thinner, alcohol, or chemical products.
6. Do not block the holes of the mood lamp. Install the product according to the manual.
7. Do not place the product near a radiator, temperature controller, stove, or other heat source.
8. Make sure to protect the cable near the adapter from being stepped on, and especially from the
plug getting stuck.
9. Only use components / accessories designated by the manufacturer.
10. Only use the product on a stable stand, table, or desk.
11. Unplug the mood lamp when there is lightning.
12. Unplug the mood lamp when not in use.