User's Manual

※ Annex 3. IP Router
72
※※
IP Router User Manual
For Customers who use Routers inside their intranet environment
for PC & DVR internet access.
1 The following steps will guide you to allocate Private IP address
to DVR Server.
Goto [Start] – [Control Panel] – [My Network Places]
2 Click the right mouse button from [Local Area Connection] in
LAN or High Speed Internet.
3 Click [Properties].
4 Double click [Internet Protocol (TCP/IP)].
5 Manually input private IP address, do not select [Automatically
Obtain IP Address.] If you do not know your IP address:
Click [Start] – Click [Run] and enter cmd or command and press
OK. A black DOS screen will appear, then type ipconfig’ and
press Enter. Your IP Address, Submask and GateWay will be
displayed, use these IP addresses and enter into Step 5
- Insert ‘168.126.63.1’ for DNS.
6 After the setup is complete, you must access your router to set
Port Forwarding.
- Refer to Router manual since Port forwarding function is
different for every Router.
<Following is an example of AnyGate IP Router.>
Port forwarding Port No. : 20408, 26540
7 Refer to Dynamic IP Manual after the above setup is complete.