User's Manual

Ⅱ User Manual - WebClient
66
67
1-2 Display Mode
Display Mode: There are two modes
available: YUV Mode & RGB Mode. RGB
Mode uses more overload than YUV
Mode. If you are not able to view the
images using YUV Mode, update the
Graphics Card Driver and if problem
persists check whether the Graphics Card
supports YUV Mode
Connect to All Channel (All Mode )
WebClient program is set to All Mode as default.
If you wish to view all channels from the Server, click [Connect]
button while it is set to [All Mode].
Connect to specific channel ( Select Mode)
1-3 Screen Partition
There are 7 variations of screen
partitioning that is supported according to
camera number.
If you wish to view specific channels from the
Server(Not all channels), convert to [Select
Mode] and click [Connect] button. Displayed
above, channel selection panel will appear on
the right side of WebClient program. Select
the specific channel and click [Start] button.
1-4 Connection