Operation Manual

(187PO) MODEL ZS8110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/09/2016
187
PO
SAVE THESE INSTRUCTIONS
English
Page 5
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Commonsalt(sodiumchloride)ismadeupoftwoelements,sodiumandchloride.Duringthe
installation of your Ozone & Saltwater System, a measured quantity of salt is dissolved in the
pool water to make it slightly salty. The pool water flows through the Ozone & Saltwater System’s
electrolytic cell to produce chlorine. The chlorine dissolves in the water and instantly starts
destroying bacteria and algae. It also oxidizes all other organic materials.
OzoneismadebydrawingairthroughCoronaDischarge(CD)cellsthatbreakdownoxygen
molecules, which then recombine into ozone molecules. Ozone gas is introduced to the pool
circulation line using a venturi injector. Water passing through the injector creates a suction that
pulls the ozone gas into the water. The ozone dissolves in the water. Ozone can oxidize some
contaminants and most bacteria.
HOW THE CHLORINE IS GENERATED
 Power: 110-120VoltAC
Amperage: 1.1A
 IdealSaltLevel: 3000ppm(partspermillion)
Maximum Chlorine Output/hour: 11 grams/hour
Ozone Output: 150 mg/hour
 Filterpumpminimumflowrate: 1500~4000gallons/hour
  (5680-15140liters/hour)
Limited Warranty: see “Limited Warranty”
HOW OZONE IS GENERATED
PRODUCT SPECIFICATIONS
Flow SensorElectrolytic Cell
Power Switch
Ozone Generator
Electronic
Control Station
Hose from
Filter Pump
Hose Returning
Water to Pool