Operation Manual

(187PO) MODEL ZS8110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/09/2016
187
PO
SAVE THESE INSTRUCTIONS
English
Page 15
LED CODE CHART
LED Reading Definitions
80 BoostMode
 00 Stand-ByMode(Start-up)
 01 MinimumOperatingHour(1hourremaining)
 02 OperatingHours(2hoursremaining)
 03 OperatingHours(3hoursremaining)
 04 OperatingHours(4hoursremaining)
 05 OperatingHours(5hoursremaining)
 06 OperatingHours(6hoursremaining)
 07 OperatingHours(7hoursremaining)
 08 OperatingHours(8hoursremaining)
 09 OperatingHours(9hoursremaining)
 10 OperatingHours(10hoursremaining)
 11 OperatingHours(11hoursremaining)
 12 MaximumOperatingHours(12hoursremaining)
 90 AlarmCode(LowPumpFlow/NoPumpFlow)
 91 AlarmCode(LowSaltLevel)
 92 AlarmCode(HighSaltLevel)
 93 Stand-ByMode(OperatingProcessfinished)
 “BLANK” NoPoweror“PowerSavingMode”waitingtostartnext
Ozone & Saltwater System cycle.
IMPORTANT
When Code “90” alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Ozone & Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.