(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO OWNER’S MANUAL IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. Krystal Clear Ozone & Saltwater System TM Model ZS6110 For illustrative purposes only.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English TABLE OF CONTENTS Warnings............................................................................... 3 Parts References................................................................. 4 Product Information & Specifications................................ 5 Setup Instructions................................................................ 6-7 Salt & Pool Water Volumes....................................
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • To reduce the risk of injury, do not permit children to use this product. Always supervise children and those with disabilities. • Children must stay away from this product and all electrical cords. • Only for outdoor use.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 1 7 3 8 2 2 5 4 6 9 10 11 12 NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. REF. NO. DESCRIPTION QTY. SPARE PART NO.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English HOW THE CHLORINE IS GENERATED This product is specially designed for above ground pools. It will destroy the bacteria, oxidize bather organics and control algae, which provide a safe, clean and comfortable swimming pool. Common salt (sodium chloride) is made up of two elements, sodium and chloride.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English SETUP INSTRUCTIONS IMPORTANT • The Ozone & Saltwater System requires a separate filter pump [1500~4000 gph (5680~15140 lph)] to drive the water and function properly. • The Ozone & Saltwater System must be installed as the last piece of pool equipment in the water return line to the pool as displayed in Drawing #1. This location extends the life of the titanium plates. 1.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English SETUP INSTRUCTIONS (continued) Connecting the system to other types of pump (with different type of thread or no thread): The Ozone & Saltwater System can also be adapted to other filter pumps with different thread or those without a thread on the connection. Connection to 1-1/2” (38mm) hose with clamp: LARGE HOSE CLAMP 8 FILTER PUMP ID 1-1/2” (38mm) CONNECTION OZONE & SALTWATER SYSTEM 1.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English SALT & POOL WATER VOLUMES • Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt). However, it will take a longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda) colored salt.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 328 PO English INTEX POOLS SALT TABLE This table shows the amount of salt needed to achieve and maintain the optimal 3000 ppm salt level. Pool Size Water Capacity (Calculated at Salt Needed for 90% for Frame Pool and 80% Startup for Easy Set & Oval Pool) 3.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear and clean, and to maximize the performance of the device, add cyanuric acid to the pool. We recommend that the cyanuric acid level be maintained at approximately 1% of the salt, i.e. 100 Lbs (45 Kgs) salt x 1% = 1 Lbs (0.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO SALT CALCULATION FORMULA FOR ALL POOLS Salt Needed for Startup (Lbs) Salt Needed for Startup (Kgs) Water Capacity (Gals) x 0.025 Water Capacity (Liters) x 0.003 Salt Needed when Salt Needed when Low Salt Detected (Lbs) Low Salt Detected (Kgs) Water Capacity (Gals) x 0.0067 Water Capacity (Liters) x 0.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO OPERATION INSTRUCTIONS IMPORTANT: To maximize the ozone output of the system, select a daily start time, usually after 10:00am, when humidity is the lowest. 1. Turn on the filter pump. 2. Start up the unit: Plug the power cord into the electrical outlet and test the GFCI/RCD (circuit breaker). Press button.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO OPERATION INSTRUCTIONS (continued) 6. Boost cycle • After a heavy rain or if the pool is dirty, press and hold “BOOST” button for 5 seconds until the indicator lights up and the LED display “80”. This indicates that the Ozone & Saltwater system has started ozone and more chlorine sanitizer production.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO MAINTENANCE Flow Sensor Cleaning 1. In a counter-clockwise motion unscrew the collar of the flow sensor (7) and remove it from the electrolytic cell conduit. See “Part Reference”. 2. If deposits and debris are seen on the surface of the flow sensor, then use a garden hose to wash it off. Locator Notch Hinge Connection Ridge 3.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO MAINTENANCE (continued) 4. Unscrew the collar of the flow sensor (7) and pull out the flow sensor from the electrolytic cell (9) housing. 5. Pour kitchen grade vinegar into the electrolytic cell (9) to immerse the titanium electrodes. Soak for 1 hour. 6. Open one side of the cell cover (11), drain and properly dispose of the vinegar. Connect the hose which goes from the pool to the cell.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO MAINTENANCE (continued) INTEX® TEST STRIPS (PACKED WITH THE PRODUCT) The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity” levels at the same time. We recommend that you test the water chemistry weekly, and maintain the chlorine concentration at 0.5-3.0 ppm. Directions and Use 1. Dip the entire strip into the water and remove immediately. 2.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO POOL MAINTENANCE & CHEMICAL DEFINITIONS Free Chlorine Combined Chlorine pH Total Alkalinity Calcium Hardness Stabilizer (Cyanuric Acid) Preferred Water Chemistry Reading Minimum Ideal 0 0.5 - 3 ppm 0 0 ppm 7.2 7.4 - 7.6 40 ppm 80 ppm 50 ppm 100 - 250 ppm 10 ppm 20 - 40 ppm Maximum 5.0 ppm 0.2 ppm 7.8 120 ppm 350 ppm 50 ppm Free Chlorine - Is the chlorine residual present in pool water.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO TROUBLESHOOTING GUIDE PROBLEM CAUSE SOLUTION INSUFFICIENT CHLORINE • Insufficient operating hours of the Ozone & Saltwater System. • The salt level in the pool water is less than 2000 ppm. This is insufficient. • Chlorine loss due to intense sunlight exposure. • The bather load has increased. • Clogged or dirty electrolytic cell. • High UV level exposure.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO TROUBLESHOOTING GUIDE (continued) LED PANEL CODE PROBLEM SOLUTION LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). 1. Filter pump not attached to system and/or switch on. • Ensure filter pump is attached and operating. See "Setup Instruction". 2. Circulation line is blocked. • If your unit has plunger valves, ensure that they are open.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO CONTROL STATION REPLACEMENT Tools required: One (1) Phillips screwdriver. If only the control station (10) needs to be replaced as instructed by the service center, remove all the components inside the dotted frame and keep them in a safe place for later use. Once you have received the new replacement control station, reinstall all the components from the previous unit to the new control station.
(328PO) MODEL ZS6110 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 05/26/2017 English 328 PO LIMITED WARRANTY TM Your Krystal Clear Ozone & Saltwater System has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This Limited Warranty applies TM only to the Krystal Clear Ozone & Saltwater System and accessories listed below.
